<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Syncfusion.Compression.Base</name>
    </assembly>
    <members>
        <member name="T:Syncfusion.Compression.ChecksumCalculator">
            <summary>
            Checksum calculator, based on Adler32 algorithm.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.ChecksumCalculator.DEF_CHECKSUM_BIT_OFFSET">
            <summary>
            Bits offset, used in adler checksum calculation.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.ChecksumCalculator.DEF_CHECKSUM_BASE">
            <summary>
            Lagrest prime, less than 65535
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.ChecksumCalculator.DEF_CHECKSUM_ITERATIONSCOUNT">
            <summary>
            Count of iteration used in calculated of the adler checksumm.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.ChecksumCalculator.ChecksumUpdate(System.Int64@,System.Byte[],System.Int32,System.Int32)">
            <summary>
            Updates checksum by calculating checksum of the 
            given buffer and adding it to current value.
            </summary>
            <param name="checksum">Current checksum.</param>
            <param name="buffer">Data byte array.</param>
            <param name="offset">Offset in the buffer.</param>
            <param name="length">Length of data to be used from the stream.</param>
        </member>
        <member name="M:Syncfusion.Compression.ChecksumCalculator.ChecksumGenerate(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Generates checksum by calculating checksum of the 
            given buffer.
            </summary>
            <param name="buffer">Data byte array.</param>
            <param name="offset">Offset in the buffer.</param>
            <param name="length">Length of data to be used from the stream.</param>
        </member>
        <member name="T:Syncfusion.Compression.CompressedStreamReader">
            <summary>
            Reader, that reads stream with compressed data
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HEADER_METHOD_MASK">
            <summary>
            Mask for compression method to be decoded from 16-bit header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HEADER_INFO_MASK">
            <summary>
            Mask for compression info to be decoded from 16-bit header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HEADER_FLAGS_FCHECK">
            <summary>
            Mask for check bits to be decoded from 16-bit header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HEADER_FLAGS_FDICT">
            <summary>
            Mask for dictionary presence to be decoded from 16-bit header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HEADER_FLAGS_FLEVEL">
            <summary>
            Mask for compression level to be decoded from 16-bit header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_MAX_WINDOW_SIZE">
            <summary>
            Maximum size of the data window.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_REPEATE_MAX">
            <summary>
            Maximum length of the repeatable block.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_END_BLOCK">
            <summary>
            End of the block sign.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_LENGTH_MINIMUM_CODE">
            <summary>
            Minimal length code.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_LENGTH_MAXIMUM_CODE">
            <summary>
            Maximal length code.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_DISTANCE_MAXIMUM_CODE">
            <summary>
            Maximal distance code.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_DYNTREE_REPEAT_MINIMUMS">
            <summary>
            Minimum count of repetions.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_DYNTREE_REPEAT_BITS">
            <summary>
            Bits, that responds for different repetion modes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_REPEAT_LENGTH_BASE">
            <summary>
            Length bases.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_REPEAT_LENGTH_EXTENSION">
            <summary>
            Length extended bits count.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_REPEAT_DISTANCE_BASE">
            <summary>
            Distance bases.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.DEF_HUFFMAN_REPEAT_DISTANCE_EXTENSION">
            <summary>
            Distance extanded bits count.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_InputStream">
            <summary>
            Input stream.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_CheckSum">
            <summary>
            Currently calculated checksum, 
            based on Adler32 algorithm.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_Buffer">
            <summary>
            Currently read 4 bytes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_BufferedBits">
            <summary>
            Count of bits that are in buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_temp_buffer">
            <summary>
            Temporary buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_Block_Buffer">
            <summary>
            32k buffer for unpacked data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_bNoWrap">
            <summary>
            No wrap mode.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_WindowSize">
            <summary>
            Window size, can not be larger than 32k.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_CurrentPosition">
            <summary>
            Current position in output stream.
            Current in-block position can be extracted by applying Int16.MaxValue mask.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_DataLength">
            <summary>
            Data length.
            Current in-block position can be extracted by applying Int16.MaxValue mask.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_bReadingUncompressed">
            <summary>
            Sign of uncompressed data reading.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_UncompressedDataLength">
            <summary>
            Size of the block with uncompressed data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_bCanReadNextBlock">
            <summary>
            Specifies wheather next block can to be read.
            Reading can be denied because the header of the last block have been read.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_bCanReadMoreData">
            <summary>
            Specifies wheather user can read more data from stream.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_CurrentLengthTree">
            <summary>
            Current lengths huffman tree.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_CurrentDistanceTree">
            <summary>
            Current distances huffman tree.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamReader.m_bCheckSumRead">
            <summary>
            Specifies wheather checksum has been read.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.#ctor(System.IO.Stream)">
            <summary>
            TODO: place correct comment here
            </summary>
            <param name="stream"/>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.#ctor(System.IO.Stream,System.Boolean)">
            <summary>
            Creates new reader for streams with compressed data.
            </summary>
            <param name="stream"></param>
            <param name="bNoWrap"></param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ChecksumReset">
            <summary>
            Resets current checksum to 1.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ChecksumUpdate(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Updates checksum by calculating checksum of the 
            given buffer and adding it to current value.
            </summary>
            <param name="buffer">Data byte array.</param>
            <param name="offset">Offset in the buffer.</param>
            <param name="length">Length of data to be used from the stream.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.SkipToBoundary">
            <summary>
            Discards left-most partially used byte.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadPackedBytes(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Reads array of bytes.
            </summary>
            <param name="buffer">Output buffer.</param>
            <param name="offset">Offset in output buffer.</param>
            <param name="length">Length of the data to be read.</param>
            <returns>Count of bytes actually read to the buffer.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.FillBuffer">
            <summary>
            Fill`s empty parts of the buffer.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.PeekBits(System.Int32)">
            <summary>
            Reads specified count of bits without adjusting position.
            </summary>
            <param name="count">Count of bits to be read.</param>
            <returns>Read value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.SkipBits(System.Int32)">
            <summary>
            Skips specified count of bits.
            </summary>
            <param name="count">Count of bits to be skipped.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadBits(System.Int32)">
            <summary>
            Reads specified count of bits from stream.
            </summary>
            <param name="count">Count of bits to be read.</param>
            <returns>
            TODO: place correct comment here
            </returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadInt16">
            <summary>
            TODO: place correct comment here
            </summary>
            <returns>
            TODO: place correct comment here
            </returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadInt16Inverted">
            <summary>
            TODO: place correct comment here
            </summary>
            <returns>
            TODO: place correct comment here
            </returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadInt32">
            <summary>
            TODO: place correct comment here
            </summary>
            <returns>
            TODO: place correct comment here
            </returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadZLibHeader">
            <summary>
            Reads ZLib header with compression method and flags.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.BitsToString(System.Int32,System.Int32)">
            <summary>
            TODO: place correct comment here
            </summary>
            <returns>
            TODO: place correct comment here
            </returns>
            <param name="bits"/>
            <param name="count"/>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.DecodeDynHeader(Syncfusion.Compression.DecompressorHuffmanTree@,Syncfusion.Compression.DecompressorHuffmanTree@)">
            <summary>
            Reades dynamic huffman codes from block header.
            </summary>
            <param name="lengthTree">Literals/Lengths tree.</param>
            <param name="distanceTree">Distances tree.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.DecodeBlockHeader">
            <summary>
            Reads and decodes block of data.
            </summary>
            <returns>True if buffer was empty and new data was read, otherwise - False.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.ReadHuffman">
            <summary>
            Decodes huffman codes.
            </summary>
            <returns>True if some data was read.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamReader.Read(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Reads data to buffer.
            </summary>
            <param name="buffer">Output buffer for data.</param>
            <param name="offset">Offset in output data.</param>
            <param name="length">Length of the data to be read.</param>
            <returns>Count of bytes actually read.</returns>
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamReader.AvailableBits">
            <summary>
            GET count of bits available
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamReader.AvailableBytes">
            <summary>
            Get count of full bytes available.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.CompressionLevel">
            <summary>
            Compression level.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.NoCompression">
            <summary>
            Pack without compression
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.BestSpeed">
            <summary>
            Use high speed compression, reduce of data size is low
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.BelowNormal">
            <summary>
            Something middle between normal and BestSpeed compressions
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.Normal">
            <summary>
            Use normal compression, middle between speed and size
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.AboveNormal">
            <summary>
            Pack better but require a little more time
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressionLevel.Best">
            <summary>
            Use best compression, slow enough
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.CompressedStreamWriter">
            <summary>
            Represents the compressed stream writer
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_ZLIB_HEADER_TEMPLATE">
            <summary>
            Start template of the zlib header.
            </summary>                               
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEFAULT_MEM_LEVEL">
            <summary>
            Memory usage level.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_PENDING_BUFFER_SIZE">
            <summary>
            Size of the pending buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_HUFFMAN_BUFFER_SIZE">
            <summary>
            Size of the buffer for the huffman encoding.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_HUFFMAN_LITERAL_ALPHABET_LENGTH">
            <summary>
            Length of the literal alphabet(literal+lengths).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_HUFFMAN_DISTANCES_ALPHABET_LENGTH">
            <summary>
            Distances alphabet length.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_HUFFMAN_BITLEN_TREE_LENGTH">
            <summary>
            Length of the code-lengths tree.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.DEF_HUFFMAN_ENDBLOCK_SYMBOL">
            <summary>
            Code of the symbol, than means the end of the block.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.WSIZE">
            <summary>
            Maximum window size.
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.WMASK">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.HASH_BITS">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.HASH_SIZE">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.HASH_MASK">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MAX_MATCH">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MIN_MATCH">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.HASH_SHIFT">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MIN_LOOKAHEAD">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MAX_DIST">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.GOOD_LENGTH">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MAX_LAZY">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.NICE_LENGTH">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MAX_CHAIN">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.COMPR_FUNC">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.MAX_BLOCK_SIZE">
            <summary>
            Internal compression engine constant
            </summary>		
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_stream">
            <summary>
            Output stream.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_PendingBuffer">
            <summary>
            Pending buffer for writing.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_PendingBufferLength">
            <summary>
            Length of the unflushed data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_PendingBufferBitsCache">
            <summary>
            Bits cache for pending buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_PendingBufferBitsInCache">
            <summary>
            Count of bits in pending buffer cache.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_bNoWrap">
            <summary>
            If true, no zlib header will be written to the stream.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_CheckSum">
            <summary>
            Current checksum.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_Level">
            <summary>
            Current compression level.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_treeLiteral">
            <summary>
            Current tree for literals.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_treeDistances">
            <summary>
            Current tree for distances.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_treeCodeLengths">
            <summary>
            Current tree for code lengths.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_iBufferPosition">
            <summary>
            Current position in literals and distances buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrLiteralsBuffer">
            <summary>
            Recorded literals buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrDistancesBuffer">
            <summary>
            Recorded distances buffer.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_iExtraBits">
            <summary>
            Count of the extra bits.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrLiteralCodes">
            <summary>
            Static array of the literal codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrLiteralLengths">
            <summary>
            Static array of the lengths of the literal codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrDistanceCodes">
            <summary>
            Static array of the distance codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_arrDistanceLengths">
            <summary>
            Static array of the lengths of the distance codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_bStreamClosed">
            <summary>
            If true, no futher writings can be performed.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_CurrentHash">
            <summary>
            Current hash.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_HashHead">
            <summary>
            Hash m_HashHead.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_HashPrevious">
            <summary>
            Previous hashes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_MatchStart">
            <summary>
            Start of the matched part.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_MatchLength">
            <summary>
            Length of the matched part.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_MatchPreviousAvailable">
            <summary>
            Previous match available.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_BlockStart">
            <summary>
            Start of the data window.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_StringStart">
            <summary>
            String start in data window.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_LookAhead">
            <summary>
            Lookahead.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_DataWindow">
            <summary>
            Data window.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_MaximumChainLength">
            <summary>
            Maximum chain length.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_MaximumLazySearch">
            <summary>
            Maximum distance of the search with "lazy" algotithm.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_NiceLength">
            <summary>
            Nice length of the block.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_GoodLength">
            <summary>
            Good length of the block.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_CompressionFunction">
            <summary>
            Current compression function.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_InputBuffer">
            <summary>
            Current block of the data to be compressed.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_TotalBytesIn">
            <summary>
            Total count of bytes, that were compressed.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_InputOffset">
            <summary>
            Offset in the input buffer, where input starts.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_InputEnd">
            <summary>
            Offset in the input buffer, where input ends.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.m_bCloseStream">
            <summary>
            If true, stream will be closed after the last block.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.#cctor">
            <summary>
            Initializes statical data for huffman compression.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.#ctor(System.IO.Stream,System.Boolean,Syncfusion.Compression.CompressionLevel,System.Boolean)">
            <summary>
            Initializes compressor and writes ZLib header if needed.
            </summary>
            <param name="outputStream">Output stream.</param>
            <param name="bNoWrap">If true, ZLib header and checksum will not be written.</param>
            <param name="level">Compression level.</param>
            <param name="bCloseStream">If true, output stream will be closed after the last block has been written.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.#ctor(System.IO.Stream,System.Boolean,System.Boolean)">
            <summary>
            Initializes compressor and writes ZLib header if needed.
            Compression level is set to normal.
            </summary>
            <param name="outputStream">Output stream.</param>
            <param name="bNoWrap">If true, ZLib header and checksum will not be written.</param>
            <param name="bCloseStream">If true, output stream will be closed after the last block has been written.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.#ctor(System.IO.Stream,Syncfusion.Compression.CompressionLevel,System.Boolean)">
            <summary>
            Initializes compressor and writes ZLib header.
            </summary>
            <param name="outputStream">Output stream.</param>
            <param name="level">Compression level.</param>
            <param name="bCloseStream">If true, output stream will be closed after the last block has been written.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.#ctor(System.IO.Stream,System.Boolean)">
            <summary>
            Initializes compressor and writes ZLib header.
            </summary>
            <param name="outputStream">Output stream.</param>
            <param name="bCloseStream">If true, output stream will be closed after the last block has been written.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.Write(System.Byte[],System.Int32,System.Int32,System.Boolean)">
            <summary>
            Compresses data and writes it to the stream.
            </summary>
            <param name="data">Data to compress</param>
            <param name="offset">offset in data array</param>
            <param name="length">length of data to compress</param>
            <param name="bCloseAfterWrite">True - write last compress block in stream, 
            otherwise False</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.WriteZLIBHeader">
            <summary>
            Writes ZLib header to stream.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.FillWindow">
            <summary>
            Fill the window
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.SlideWindow">
            <summary>
            Slides current window, and data, associated with it.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.UpdateHash">
            <summary>
            Updates hash.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.InsertString">
            <summary>
            Inserts string to the hash.
            </summary>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.FindLongestMatch(System.Int32)">
            <summary>
            Searches for the longest match.
            </summary>
            <param name="curMatch"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.SaveStored(System.Boolean,System.Boolean)">
            <summary>
            Store data without compression.
            </summary>
            <param name="flush"></param>
            <param name="finish"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.CompressFast(System.Boolean,System.Boolean)">
            <summary>
            Compress with a maximum speed.
            </summary>
            <param name="flush"></param>
            <param name="finish"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.CompressSlow(System.Boolean,System.Boolean)">
            <summary>
            Compress, using maximum compression level.
            </summary>
            <param name="flush"></param>
            <param name="finish"></param>
            <returns></returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.CompressData(System.Boolean)">
            <summary>
            CompressData drives actual compression of data
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanReset">
            <summary>
            Reset internal state
            </summary>		
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanLengthCode(System.Int32)">
            <summary>
            Calculates length code from length.
            </summary>
            <param name="len">Length.</param>
            <returns>Length code.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanDistanceCode(System.Int32)">
            <summary>
            Calculates distance code from distance.
            </summary>
            <param name="distance">Distance.</param>
            <returns>Distance code.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanSendAllTrees(System.Int32)">
            <summary>
            Write all trees to pending buffer
            </summary>		
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanCompressBlock">
            <summary>
            Compress current buffer writing data to pending buffer
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanFlushStoredBlock(System.Byte[],System.Int32,System.Int32,System.Boolean)">
            <summary>
            Flush block to output with no compression
            </summary>
            <param name="stored">Data to write</param>
            <param name="storedOffset">Index of first byte to write</param>
            <param name="storedLength">Count of bytes to write</param>
            <param name="lastBlock">True if this is the last block</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanFlushBlock(System.Byte[],System.Int32,System.Int32,System.Boolean)">
            <summary>
            Flush block to output with compression
            </summary>		
            <param name="stored">Data to flush</param>
            <param name="storedOffset">Index of first byte to flush</param>
            <param name="storedLength">Count of bytes to flush</param>
            <param name="lastBlock">True if this is the last block</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanTallyLit(System.Int32)">
            <summary>
            Add literal to buffer.
            </summary>
            <param name="literal"></param>
            <returns>Value indicating internal buffer is full</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.HuffmanTallyDist(System.Int32,System.Int32)">
            <summary>
            Add distance code and length to literal and distance trees
            </summary>
            <param name="dist">Distance code</param>
            <param name="len">Length</param>
            <returns>Value indicating if internal buffer is full</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteByte(System.Int32)">
            <summary>
            write a byte to buffer
            </summary>
            <param name="b">
            value to write
            </param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteShort(System.Int32)">
            <summary>
            Write a short value to buffer LSB first
            </summary>
            <param name="s">
            value to write
            </param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteInt(System.Int32)">
            <summary>
            write an integer LSB first
            </summary>
            <param name="s">value to write</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteByteBlock(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Write a block of data to buffer
            </summary>
            <param name="data">data to write</param>
            <param name="offset">offset of first byte to write</param>
            <param name="length">number of bytes to write</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferAlignToByte">
            <summary>
            Align internal buffer on a byte boundary
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteBits(System.Int32,System.Int32)">
            <summary>
            Write bits to internal buffer
            </summary>
            <param name="b">source of bits</param>
            <param name="count">number of bits to write</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferWriteShortMSB(System.Int32)">
            <summary>
            Write a short value to internal buffer most significant byte first
            </summary>
            <param name="s">value to write</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferFlush">
            <summary>
            Flushes the pending buffer into the given output array.  If the
            output array is to small, only a partial flush is done.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferFlushBits">
            <summary>
            Flushes fully recorded bytes to buffer array.
            </summary>
            <returns>Count of bytes, added to buffer.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressedStreamWriter.PendingBufferToByteArray">
            <summary>
            Convert internal buffer to byte array.
            Buffer is empty on completion
            </summary>
            <returns>
            converted buffer contents contents
            </returns>
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamWriter.TotalIn">
            <summary>
            Total data processed.
            </summary>		
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamWriter.NeedsInput">
            <summary>
            Return true if input is needed
            </summary>		
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamWriter.HuffmanIsFull">
            <summary>
            Checks, wheather huffman compression buffer is full.
            </summary>
            <returns>True if buffer is full.</returns>
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamWriter.PendingBufferBitCount">
            <summary>
            The number of bits written to the buffer
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.CompressedStreamWriter.PendingBufferIsFlushed">
            <summary>
            Indicates if buffer has been flushed
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.CompressedStreamWriter.BlockType">
            <summary>
            Type of the block.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.BlockType.Stored">
            <summary>
            Data simply stored as is
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.BlockType.FixedHuffmanCodes">
            <summary>
            An option to use Fixed Huffman tree codes
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressedStreamWriter.BlockType.DynamicHuffmanCodes">
            <summary>
            An option to use Dynamically built Huffman codes
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.CompressorHuffmanTree">
            <summary>
            Represents the Huffman Tree.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_CodeFrequences">
            <summary>
            Frequences of the codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_Codes">
            <summary>
            Codes itself.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_CodeLengths">
            <summary>
            Bit counts, needed to encode different codes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_LengthCounts">
            <summary>
            Count of codes with some lengths.
            Index - length, value - count.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_CodeMinimumCount">
            <summary>
            TODO: place correct comment here
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_CodeCount">
            <summary>
            TODO: place correct comment here
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_MaximumLength">
            <summary>
            TODO: place correct comment here
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.CompressorHuffmanTree.m_Writer">
            <summary>
            Data compressor.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.#ctor(Syncfusion.Compression.CompressedStreamWriter,System.Int32,System.Int32,System.Int32)">
            <summary>
            Create a new Huffman tree
            </summary>
            <param name="writer"/>
            <param name="iElementsCount"/>
            <param name="iMinimumCodes"/>
            <param name="iMaximumLength"/>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.Reset">
            <summary>
            Resets all code data in tree.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.WriteCodeToStream(System.Int32)">
            <summary>
            Writes code to the compressor output stream.
            </summary>
            <param name="code">Code to be written.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.CheckEmpty">
            <summary>
            Checks wheather tree is empty.
            If tree is not empty, then exception will be raised.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.SetStaticCodes(System.Int16[],System.Byte[])">
            <summary>
            Specifies new arrays of codes and their lengths.
            </summary>
            <param name="codes">Array of codes.</param>
            <param name="lengths">Array of code lengths.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.BuildCodes">
            <summary>
            Calculates codes from their frequences.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.BuildLength(System.Int32[])">
            <summary>
            Build tree with lengths.
            </summary>
            <param name="childs"></param>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.BuildTree">
            <summary>
            Builds tree.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.GetEncodedLength">
            <summary>
            Calculates length of the compressed data.
            </summary>
            <returns>Count of bits, the data will occupy.</returns>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.CalcBLFreq(Syncfusion.Compression.CompressorHuffmanTree)">
            <summary>
            Calculates code frequences.
            </summary>
            <param name="blTree">Tree.</param>
        </member>
        <member name="M:Syncfusion.Compression.CompressorHuffmanTree.WriteTree(Syncfusion.Compression.CompressorHuffmanTree)">
            <summary>
            Writes tree to output stream.
            </summary>
            <param name="blTree">Tree to be written.</param>
        </member>
        <member name="P:Syncfusion.Compression.CompressorHuffmanTree.TreeLength">
            <summary>
            Length of the tree.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.CompressorHuffmanTree.CodeLengths">
            <summary>
            Lengths of codes in tree.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.CompressorHuffmanTree.CodeFrequences">
            <summary>
            Code frequences.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.DecompressorHuffmanTree">
            <summary>
            Huffman tree, used for decompression.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.DecompressorHuffmanTree.MAX_BITLEN">
            <summary>
            Maximum count of bits.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.DecompressorHuffmanTree.m_Tree">
            <summary>
            Build huffman tree.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.DecompressorHuffmanTree.m_LengthTree">
            <summary>
            Huffman tree for encoding and decoding lengths.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.DecompressorHuffmanTree.m_DistanceTree">
            <summary>
            huffman tree for encoding and decoding distances.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.#cctor">
            <summary>
            Generates fixed huffman trees.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.#ctor(System.Byte[])">
            <summary>
            Creates huffman tree.
            </summary>
            <param name="codeLengths"></param>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.PrepareData(System.Int32[],System.Int32[],System.Byte[],System.Int32@)">
            <summary>
            Prepares data for generating huffman tree.
            </summary>
            <param name="blCount">Array of counts of each code length.</param>
            <param name="nextCode">Numerical values of the smallest code for each code length.</param>
            <param name="lengths">Array of code lengths.</param>
            <param name="treeSize">Calculated tree size.</param>
            <returns>Code.</returns>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.TreeFromData(System.Int32[],System.Int32[],System.Byte[],System.Int32,System.Int32)">
            <summary>
            Generates huffman tree.
            </summary>
            <param name="blCount">Array of counts of each code length.</param>
            <param name="nextCode">Numerical values of the smallest code for each code length.</param>
            <param name="code">Precalculated code.</param>
            <param name="lengths">Array of code lengths.</param>
            <param name="treeSize">Calculated size of the tree.</param>
            <returns>Generated tree.</returns>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.BuildTree(System.Byte[])">
            <summary>
            Builds huffman tree from array of code lengths.
            </summary>
            <param name="lengths">Array of code lengths.</param>
        </member>
        <member name="M:Syncfusion.Compression.DecompressorHuffmanTree.UnpackSymbol(Syncfusion.Compression.CompressedStreamReader)">
            <summary>
            Reads and decompresses one symbol.
            </summary>
            <param name="input"></param>
            <returns></returns>
        </member>
        <member name="P:Syncfusion.Compression.DecompressorHuffmanTree.LengthTree">
            <summary>
            GET huffman tree for encoding and decoding lengths.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.DecompressorHuffmanTree.DistanceTree">
            <summary>
            GET huffman tree for encoding and decoding distances.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Utils">
            <summary>
            Utility Class
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Utils.DEF_REVERSE_BITS">
            <summary>
            Bit-indexes for reversing.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Utils.DEF_HUFFMAN_DYNTREE_CODELENGTHS_ORDER">
            <summary>
            Code lengths for the code length alphabet.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Utils.BitReverse(System.Int32)">
            <summary>
            Reverses bit.
            </summary>
            <param name="value"></param>
            <returns></returns>
        </member>
        <member name="T:Syncfusion.Compression.Zip.BeginsWithNamePreprocessor">
            <summary>
            Implemenation of IFileNamePreprocessor interface that simply removes
            some string from the name start and converts all \ characters into /.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.IFileNamePreprocessor">
            <summary>
            Preprocesses file name before ZipArchiveItem saving. Used to convert full item path into local one.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.IFileNamePreprocessor.PreprocessName(System.String)">
            <summary>
            Somehow converts full path into name that will be stored in the zip archive.
            </summary>
            <param name="fullName">Name to process.</param>
            <returns>Converted name.</returns>
        </member>
        <member name="F:Syncfusion.Compression.Zip.BeginsWithNamePreprocessor.m_strStartToRemove">
            <summary>
            String to remove from the name start.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.BeginsWithNamePreprocessor.#ctor(System.String)">
            <summary>
            Initializes new instance of the name preprocessor.
            </summary>
            <param name="startToRemove">String to remove from the name start.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.BeginsWithNamePreprocessor.PreprocessName(System.String)">
            <summary>
            Somehow converts full path into name that will be stored in the zip archive.
            </summary>
            <param name="fullName">Name to process.</param>
            <returns>Converted name.</returns>
        </member>
        <member name="T:Syncfusion.Compression.Zip.Constants">
            <summary>
            Class contains all constants that are required by ZipArchive.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.HeaderSignature">
            <summary>
            Zip header signature.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.HeaderSignatureBytes">
            <summary>
            Number of bytes in HeaderSignature constant.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.BufferSize">
            <summary>
            Buffer size.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.VersionNeededToExtract">
            <summary>
            Version needed to extract.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.VersionMadeBy">
            <summary>
            Version made by.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.ShortSize">
            <summary>
            Size of the short value in bytes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.IntSize">
            <summary>
            Size of the int value in bytes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.CentralHeaderSignature">
            <summary>
            Central header signature.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.CentralDirectoryEndSignature">
            <summary>
            End of central directory signature.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.StartCrc">
            <summary>
            Initial value for CRC-32 evaluation.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.CentralDirSizeOffset">
            <summary>
            Offset to the size field in the End of central directory record.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.Constants.HeaderSignatureStartByteValue">
            <summary>
            Start byte of the Header signature.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.Constants.#ctor">
            <summary>
            Default constructor to prevent users from creating instances of this class.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.CompressionMethod">
            <summary>
            The kind of compression used for an entry in an archive
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Stored">
            <summary>
            The file is stored (no compression).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Shrunk">
            <summary>
            The file is Shrunk.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.ReducedFactor1">
            <summary>
            The file is Reduced with compression factor 1.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.ReducedFactor2">
            <summary>
            The file is Reduced with compression factor 2.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.ReducedFactor3">
            <summary>
            The file is Reduced with compression factor 3.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.ReducedFactor4">
            <summary>
            The file is Reduced with compression factor 4.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Imploded">
            <summary>
            The file is Imploded.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Tokenizing">
            <summary>
            Reserved for Tokenizing compression algorithm.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Deflated">
            <summary>
            The file is Deflated.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.Defalte64">
            <summary>
            Enhanced Deflating using Deflate64(tm).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.PRWARE">
            <summary>
            PKWARE Data Compression Library Imploding (old IBM TERSE).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.BZIP2">
            <summary>
            File is compressed using BZIP2 algorithm.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.LZMA">
            <summary>
            LZMA (EFS).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.IBMTerse">
            <summary>
            File is compressed using IBM TERSE (new).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.LZ77">
            <summary>
            IBM LZ77 z Architecture (PFS).
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.CompressionMethod.PPMd">
            <summary>
            PPMd version I, Rev 1.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.GeneralPurposeBitFlags">
            <summary>
            General purpose bit flag.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.GeneralPurposeBitFlags.SizeAfterData">
            <summary>
            If this bit is set, the fields crc-32, compressed size and uncompressed
            size are set to zero in the local header.  The correct values are put
            in the data descriptor immediately following the compressed data.
            (Note: PKZIP version 2.04g for DOS only recognizes this bit for method 8
            compression, newer versions of PKZIP recognize this bit for any compression method.)
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.GeneralPurposeBitFlags.Unicode">
            <summary>
            Language encoding flag (EFS).  If this bit is set, the filename and
            comment fields for this file must be encoded using UTF-8.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.ZipArchive">
            <summary>
            Represents zip archive.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_arrItems">
            <summary>
            Collection of archive items.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_dicItems">
            <summary>
            Dictionary that allows quick search operations by item name.
            Key - item name,
            Value - corresponding ZipArchiveItem.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_fileNamePreprocessor">
            <summary>
            File name preprocessor - object that converts full file/folder
            name into value that will be written into zip archive.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_bCheckCrc">
            <summary>
            Indicates whether we should check Crc value when reading item's data. Check
            is performed when user gets access to decompressed data for the first time.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_defaultLevel">
            <summary>
            Default compression level.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.m_netCompression">
            <summary>
            Compresses files using custom NetCompressor.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchive.CreateCompressor">
            <summary>
            Creates compressor.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.FindValueFromEnd(System.IO.Stream,System.UInt32,System.Int32)">
            <summary>
            Searches for integer value from the end of the stream.
            </summary>
            <param name="stream">Stream to search value in.</param>
            <param name="value">Value to locate.</param>
            <param name="maxCount">Maximum number of bytes to scan.</param>
            <returns>Offset to the value, or -1 if it wasn't found.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.ReadInt32(System.IO.Stream)">
            <summary>
            Extracts Int32 value from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
            <returns>Extracted value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.ReadInt16(System.IO.Stream)">
            <summary>
            Extracts Int16 value from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
            <returns>Extracted value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.ReadUInt16(System.IO.Stream)">
            <summary>
            Extracts unsigned Int16 value from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
            <returns>Extracted value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.AddDirectory(System.String)">
            <summary>
            Adds empty directory to the archive.
            </summary>
            <param name="directoryName">Directory path.</param>
            <returns>Item that has been added.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.AddFile(System.String)">
            <summary>
            Adds specified file to the archive.
            </summary>
            <param name="fileName">File to add.</param>
            <returns>Item that has been added.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.AddItem(System.String,System.IO.Stream,System.Boolean,System.IO.FileAttributes)">
            <summary>
            Adds new item to the archive
            </summary>
            <param name="itemName">Item name to add.</param>
            <param name="data">Items data stream (can be null for empty files or folders).</param>
            <param name="bControlStream">Indicates whether ZipArchive is responsible for stream closing.</param>
            <param name="attributes">File attributes.</param>
            <returns>Item that has been added.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.AddItem(Syncfusion.Compression.Zip.ZipArchiveItem)">
            <summary>
            Adds existing item to the archive.
            </summary>
            <param name="item">Item to add.</param>
            <returns>Added item.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.RemoveItem(System.String)">
            <summary>
            Removes item from the archive.
            </summary>
            <param name="itemName">Item name to remove.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.RemoveAt(System.Int32)">
            <summary>
            Removes item at the specified position.
            </summary>
            <param name="index">Item index to remove.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Remove(System.Text.RegularExpressions.Regex)">
            <summary>
            Removes items that matches specified regular expression from the collection.
            </summary>
            <param name="mask">Regular expression used to decide whether to remove item or not.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.UpdateItem(System.String,System.IO.Stream,System.Boolean)">
            <summary>
            Updates item inside existing archive.
            </summary>
            <param name="itemName">Item name to update.</param>
            <param name="newDataStream">New data for the item.</param>
            <param name="controlStream">Indicates whether item should control its stream after update.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.UpdateItem(System.String,System.IO.Stream,System.Boolean,System.IO.FileAttributes)">
            <summary>
            Updates existing item or creates new one.
            </summary>
            <param name="itemName">Item to update or create.</param>
            <param name="newDataStream">New data for the item.</param>
            <param name="controlStream">Indicates whether item should control its stream after update.</param>
            <param name="attributes">File attributes for the item. This argument is only used if item is created.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.UpdateItem(System.String,System.Byte[])">
            <summary>
            Updates item inside existing archive.
            </summary>
            <param name="itemName">Item name to update.</param>
            <param name="newData">New data for the item.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Save(System.String)">
            <summary>
            Saves archive into specified file.
            </summary>
            <param name="outputFileName">Output file name.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Save(System.String,System.Boolean)">
            <summary>
            Saves archive into specified file.
            </summary>
            <param name="outputFileName">Output file name.</param>
            <param name="createFilePath">Indicates whether we should create full path to the file if it doesn't exist.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Save(System.IO.Stream,System.Boolean)">
            <summary>
            Saves archive into specified stream.
            </summary>
            <param name="stream">Output stream.</param>
            <param name="closeStream">Indicates whether method should close stream after saving.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Open(System.String)">
            <summary>
            Reads archive data from the file.
            </summary>
            <param name="inputFileName">Filename to read.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Open(System.IO.Stream,System.Boolean)">
            <summary>
            Reads archive data from the stream. In the current implementation
            stream must be seekable and readable to extract data.
            </summary>
            <param name="stream">Stream to read data from.</param>
            <param name="closeStream">Indicates whether method should close stream after reading.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Close">
            <summary>
            Clears all internal data.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Find(System.String)">
            <summary>
            Searches for the item with specified name.
            </summary>
            <param name="itemName">Item to find.</param>
            <returns>Zero-based item index if found; -1 otherwise.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Find(System.Text.RegularExpressions.Regex)">
            <summary>
            Searches for the item with specified name.
            </summary>
            <param name="itemRegex">Regular expression that defines item to find.</param>
            <returns>Zero-based item index if found; -1 otherwise.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.WriteCentralDirectory(System.IO.Stream)">
            <summary>
            Writes central directory to the stream.
            </summary>
            <param name="stream">Stream to write data into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.WriteCentralDirectoryEnd(System.IO.Stream,System.Int64)">
            <summary>
            Writes End of central directory record into stream.
            </summary>
            <param name="stream">Stream to write data into.</param>
            <param name="directoryStart">Offset to the central directory start.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.ReadCentralDirectoryData(System.IO.Stream)">
            <summary>
            Read central directory record from the stream.
            </summary>
            <param name="stream">Stream to read from.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.ExtractItems(System.IO.Stream)">
            <summary>
            Extracts items' data from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Clone">
            <summary>
            Creates a copy of the current instance.
            </summary>
            <returns>A copy of the current instance.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Dispose">
            <summary>
            A method to release allocated unmanaged resources.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchive.Finalize">
            <summary>
            Class finilizer.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.Item(System.Int32)">
            <summary>
            Returns single archive item from the collection. Read-only.
            </summary>
            <param name="index">Zero-based index of the item to return.</param>
            <returns>Single archive item from the collection.</returns>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.Item(System.String)">
            <summary>
            Returns item by its name. Null if item wasn't found. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.Count">
            <summary>
            Returns number of items inside archive. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.Items">
            <summary>
            Returns the items inside archive. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.FileNamePreprocessor">
            <summary>
            Gets / sets file name preprocessor - object that converts full file/folder
            name into value that will be written into zip archive.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.DefaultCompressionLevel">
            <summary>
            Gets / sets default compression level - compression level for new items.
            By default is equal to CompressionLevel.Best.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.CheckCrc">
            <summary>
            Indicates whether we should check Crc value when reading item's data. Check
            is performed when user gets access to item's decompressed data for the first time.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchive.UseNetCompression">
            <summary>
            Uses custom compressed stream reader and writer.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.ZipArchiveItem">
            <summary>
            Represents single item inside zip archive. It can be either folder or file.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_strItemName">
            <summary>
            Name of the archive item.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_compressionMethod">
            <summary>
            Compression method.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_compressionLevel">
            <summary>
            Compression level.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_uiCrc32">
            <summary>
            Crc.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_streamData">
            <summary>
            Stream with item's data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_lCompressedSize">
            <summary>
            Compressed data size.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_lOriginalSize">
            <summary>
            Original (not compressed) data size.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_bControlStream">
            <summary>
            Indicates whether this item controls it's data stream.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_bCompressed">
            <summary>
            Indicates whether internal stream contains compressed data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_lCrcPosition">
            <summary>
            Position of the size block inside local file header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_iLocalHeaderOffset">
            <summary>
            Offset to the local header.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_options">
            <summary>
            General purpose bit flag.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_iExternalAttributes">
            <summary>
            Item's external attributes.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_bCheckCrc">
            <summary>
            Indicates whether we should check crc value after decompressing item's data.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipArchiveItem.m_bOptimizedDecompress">
            <summary>
            
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.#ctor(Syncfusion.Compression.Zip.ZipArchive)">
            <summary>
            Default constructor.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.#ctor(Syncfusion.Compression.Zip.ZipArchive,System.String,System.IO.Stream,System.Boolean,System.IO.FileAttributes)">
            <summary>
            Creates new instance of the zip item.
            </summary>
            <param name="itemName">Name of the item (can be relative or absolute path).</param>
            <param name="streamData">Stream data.</param>
            <param name="controlStream">
            Indicates whether item controls stream and must close it when item finish its work.
            </param>
            <param name="attributes"></param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Update(Syncfusion.Compression.Zip.ZippedContentStream)">
            <summary>
            
            </summary>
            <param name="stream"></param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Update(System.IO.Stream,System.Boolean)">
            <summary>
            Updates internal data stream.
            </summary>
            <param name="newDataStream">New stream to set.</param>
            <param name="controlStream">Indicates whether item should conrol new stream.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ResetFlags">
            <summary>
            
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Write(System.IO.Stream)">
            <summary>
            This method saves item inside stream.
            </summary>
            <param name="outputStream">Stream to save item into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Close">
            <summary>
            Frees all internal resources and closes internal stream if necessary.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.WriteFileHeader(System.IO.Stream)">
            <summary>
            This method writes file header into Central directory record.
            </summary>
            <param name="stream">Stream to write data into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ConvertDateTime(System.DateTime)">
            <summary>
            Converts current datetime to Windows format.
            </summary>
            <param name="time">Current Date and time.</param>
            <returns>Value in Windows format.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ReadCentralDirectoryData(System.IO.Stream)">
            <summary>
            Read data from the stream based on the central directory.
            </summary>
            <param name="stream">Stream to read data from, stream.Position must point at just after correct file header.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ReadData(System.IO.Stream,System.Boolean)">
            <summary>
            Reads zipped data from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
            <param name="checkCrc">Indicates whether we should check crc value after data decompression.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ReadCompressedData(System.IO.Stream)">
            <summary>
            Extracts compressed data from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.ReadLocalHeader(System.IO.Stream)">
            <summary>
            Extracts local header from the stream.
            </summary>
            <param name="stream">Stream to read data from.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.DecompressData">
            <summary>
            Decompressed internal data if necessary.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.WriteHeader(System.IO.Stream)">
            <summary>
            Writes local file header.
            </summary>
            <param name="outputStream">Stream to write into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.WriteZippedContent(System.IO.Stream)">
            <summary>
            Writes zipped content inside stream.
            </summary>
            <param name="outputStream">Stream to write into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.WriteFooter(System.IO.Stream)">
            <summary>
            Writes local file footer into stream.
            </summary>
            <param name="outputStream">Stream to write into.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.CheckCrc">
            <summary>
            Checks whether Crc field and stream data corresponds each other.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.CloneStream(System.IO.Stream)">
            <summary>
            Creates copy of the stream.
            </summary>
            <param name="stream">Stream to copy.</param>
            <returns>Created stream.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Dispose">
            <summary>
            A method to release allocated unmanaged resources.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.Finalize">
            <summary>
            Finilizer.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipArchiveItem.IsIBM437Encoding(System.String)">
            <summary>
            Checks whether the file has unicode characters.
            </summary>
            <param name="fileName">Name of the file.</param>
            <returns></returns>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.ItemName">
            <summary>
            Name of the archive item.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.CompressionMethod">
            <summary>
            Compression method.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.CompressionLevel">
            <summary>
            Gets/sets item's compression level.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.Crc32">
            <summary>
            Crc.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.DataStream">
            <summary>
            Stream with item's data.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.CompressedSize">
            <summary>
            Compressed data size.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.OriginalSize">
            <summary>
            Original (not compressed) data size.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.ControlStream">
            <summary>
            Indicates whether this item controls it's data stream.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.Compressed">
            <summary>
            Indicates whether internal stream contains compressed data.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.ExternalAttributes">
            <summary>
            Gets / sets item's external attributes.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZipArchiveItem.OemCodePage">
            <summary>
            Gets current OEM code page.
            </summary>
        </member>
        <member name="T:Syncfusion.Compression.Zip.ZipCrc32">
            <summary>
            Crc32 implementation used in zip archive to verify data correctness.
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZipCrc32.s_crcTable">
            <summary>
            Special pre-evaluated table used for faster crc evaluation.
            Evaluated when crcNumber was 0xEDB88320. EvaluateTable method
            can be used to evaluated table with different constant.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipCrc32.ComputeCrc(System.Byte[],System.Int32,System.Int32,System.UInt32)">
            <summary>Computes crc-32 value for the buffer.</summary>
            <param name="buffer">Buffer to compute crc-32 for.</param>
            <param name="offset">Offset to the data start.</param>
            <param name="length">Data length in bytes.</param>
            <param name="startCrc">Initial crc-32 value.</param>
            <returns>Updated crc-32 value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipCrc32.ComputeCrc(System.IO.Stream,System.Int32)">
            <summary>Computes crc-32 value for the stream.</summary>
            <param name="stream">Stream to compute crc-32 for.</param>
            <param name="length">Data length in bytes.</param>
            <returns>Crc-32 value.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipCrc32.EvaluateTable(System.UInt32)">
            <summary>
            Evaluates crc table.
            </summary>
            <param name="crcNumber">"Magic" number.</param>
            <returns>Create table.</returns>
        </member>
        <member name="T:Syncfusion.Compression.Zip.ZipException">
            <summary>
            This class represents exception type that is mostly raised when some
            problems with zip extraction/creation occurs.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZipException.#ctor(System.String)">
            <summary>
            Initializes new instance of the exception class.
            </summary>
            <param name="message">Exception message.</param>
        </member>
        <member name="T:Syncfusion.Compression.Zip.ZippedContentStream">
            <summary>
            
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZippedContentStream.m_deflateStream">
            <summary>
            
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZippedContentStream.m_uiCrc32">
            <summary>
            
            </summary>
        </member>
        <member name="F:Syncfusion.Compression.Zip.ZippedContentStream.m_lSize">
            <summary>
            
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.#ctor">
            <summary>
            Initializes new instance of the stream.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.#ctor(Syncfusion.Compression.Zip.ZipArchive.CompressorCreator)">
            <summary>
            Initializes new instance of the stream.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.Flush">
            <summary>
            Clears all buffers for this stream and causes any buffered data to be written to the underlying device.
            </summary>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.Read(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Reads a sequence of bytes from the current stream and advances the position
            within the stream by the number of bytes read.
            </summary>
            <param name="buffer">An array of bytes. When this method returns, the buffer
            contains the specified byte array with the values between offset and
            (offset + count - 1) replaced by the bytes read from the current source.</param>
            <param name="offset">The zero-based byte offset in buffer at which to begin
            storing the data read from the current stream.</param>
            <param name="count">The maximum number of bytes to be read from the current stream.</param>
            <returns>The total number of bytes read into the buffer. This can be less
            than the number of bytes requested if that many bytes are not currently
            available, or zero (0) if the end of the stream has been reached.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.Seek(System.Int64,System.IO.SeekOrigin)">
            <summary>
            Sets the position within the current stream.
            </summary>
            <param name="offset">A byte offset relative to the origin parameter.</param>
            <param name="origin">A value of type SeekOrigin indicating the reference
            point used to obtain the new position.</param>
            <returns>The new position within the current stream.</returns>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.SetLength(System.Int64)">
            <summary>
            Sets the length of the current stream.
            </summary>
            <param name="value">The desired length of the current stream in bytes.</param>
        </member>
        <member name="M:Syncfusion.Compression.Zip.ZippedContentStream.Write(System.Byte[],System.Int32,System.Int32)">
            <summary>
            Writes a sequence of bytes to the current stream and advances the current
            position within this stream by the number of bytes written.
            </summary>
            <param name="buffer">An array of bytes. This method copies count bytes
            from buffer to the current stream.</param>
            <param name="offset">The zero-based byte offset in buffer at which to begin
            copying bytes to the current stream. </param>
            <param name="count">The number of bytes to be written to the current stream.</param>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.CanRead">
            <summary>
            Gets a value indicating whether the current stream supports reading. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.CanSeek">
            <summary>
            Gets a value indicating whether the current stream supports seeking. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.CanWrite">
            <summary>
            Gets a value indicating whether the current stream supports writing. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.Length">
            <summary>
            Gets the length in bytes of the stream. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.Position">
            <summary>
            Gets or sets the position within the current stream. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.ZippedContent">
            <summary>
            This property returns stream with zipped content. It closes internal deflate
            stream, so you won't be able to write anything in int. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.Crc32">
            <summary>
            Returns computed crc32 value. Read-only.
            </summary>
        </member>
        <member name="P:Syncfusion.Compression.Zip.ZippedContentStream.UnzippedSize">
            <summary>
            Returns size of the unzipped data. Read-only.
            </summary>
        </member>
    </members>
</doc>
